The Entreq range of ground boxes are designed to remove noise and pollutants present in the signal path. By removing these unwanted pollutants we lower the noise floor and subsequently improve the performance of the connected product. This improves dynamics, detail retrieval whilst remaining natural and organic in presentation.

The Silver Minimus, like its sibling the Minimus, has only 1 outlet. However it encorporates the same enhancements and mineral mix as the Silver Tellus. Thus offering a signicantly more effective grounding than the standard Minimus. Even a brief exposure to the Silver Minimus will quickly validate its benefit.

Click here for more info.

The Entreq Atlantis provides a cleaner and more stable grounding platform to a current Entreq grounding box. This both boosts capacity, as well as performance, to an already established Entreq grounding system. The Atlantis comes supplied with a short & specifically designed umbilical cable that allows you to connect directly on to the back of one of our dedicated grounding box's.

The Atlantis Tellus will enhance the performance of ALL Entreq ground boxes, even the top model Olympus Tellus.

Click here for more info.

This is one of the most sought after vintage preamps from McIntosh.

The MX110 excels at both being a great preamp and a tuner, while maintaining classic McIntosh looks. The Mclntosh MX110 is a beautifully engineered control center for the finest stereo sound systems. The extreme care in manufacturing, in layout design and in thermal engineering promises the usual Mclntosh extra values of reliability, performance, and long life.

Very rarely seen locally and a true collectors' item! In good working condition.

Click here for more info.

Click here for owner's manual

Thanks to new materials like Carbon Fibre and Termoplastic Elastomer Eat was designing a new superflat table. The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material).

The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50%

In near mint condition, and comes with original box, tonearm lead-out cable and custom-made dust cover.

Click here for more info.

Specifications

- Model No. - PS8JS
- Conductor - This Φ 0.26mm x 105 PC-Triple C
- Sectional Area - 5.575mm2 x 3
- Insulator - Audio Grade PVC + Black + Transparent Mesh
- Outer Dimensions - Φ 14.5mm
- Cable Length - 1.8m

In mint condition, with original box and papers.

Click here for more info.

Vintage KEF LS3/5A monitor speakers. In excellent condition.

An 11 cm KEF B110C type SP1228 unit is used for the middle and low frequencies up to 3 kHz, and a T27SP1032 tweeter is used for the high frequencies.

In order to completely seal the inside of the enclosure and make it airtight, PVC sheet is used on the edge of the woofer, and the unit is decoupled and sealed.

The network section consists of 26 carefully selected high-quality parts. Each speaker is individually adjusted by computer simulation, and the characteristics of the entire system are strictly controlled within ± 0.25 db of the BBC specification.

The front baffle is made of felt material around the unit to eliminate interference caused by vibration of the cabinet.

The enclosure is made of 12-mm-thick birch material, which is well known as a piano material and has excellent strength. In addition, beech wood is used as a splint for the joint part to increase the internal strength.

The Limetree BRIDGE II is a high-class network adapter or audio renderer which can transfer music digitally in studio master quality from streaming providers and local storage media to existing D/A converters or other devices with digital inputs. This makes it possible to upgrade an existing hi-fi system with streaming for little money.

The Limetree BRIDGE II is simply connected with the network by means of a LAN cable or via WLAN. It has also a USB port for connecting hard disks or USB storage media. There is an optical and a coaxial digital output. A professional studio engineering sample rate converter makes sure that all streamed formats can be played back on an existing converter without major losses in sound quality.

In as new condition, with original box and all accessories.

Click here for more info.

Click here for full review

The Audio Note (UK) Conquest Mono Power Amplifiers are Pure Class A Parallel Singled Ended valve amplifiers that use a pair of the highly regarded 300B triode valves per channel, producing a level of performance that is radically superior to the vast majority of current designs.

They have been specifically engineered for sonic performance rather than technical specification, and fulfil all Audio

Note (UK) Level 3 criteria: -

*Pure Class A operation
*Zero Negative Feedback
*Single Ended Output Stage
*Valve Rectification
*Directly Heated Triode operation
*Materials and component quality

The Silver Signature version builds upon the already superb performance of the standard CONQUEST, and features the following component upgrades: -

*Audio Note (UK) Copper Foil signal capacitors
*Audio Note (UK) Tantalum film resistors
*Audio Note (UK) IHiB Double C-core output transformers

In near mint condition. This is the later version Conquest SS with the metal AN logo in front.

Click here for more info.

The Audio Note (UK) M3 Line Pre Amplifier has been specifically engineered for sonic performance rather than technical specification, and fulfils all Audio Note (UK) Level 3 criteria: -

*Pure Class A operation
*Zero negative feedback
*Single Ended circuit topology
*Valve rectification
*Materials and component quality

The M3 Phono Pre Amplifier features an ECC82 and 5687WB line stage, powered by a 6X5 valve rectified power supply based on the M10‟s Galahad PSU. This power supply also features an ECL82 for voltage regulation and a 5651 for voltage stabilizer. Audio Note (UK) Copper wiring, a mix of our standard and AN(UK) tantalum resistors in key areas, Audio Note (UK) copper foil signal capacitors and our custom electrolytic capacitors are used throughout the circuit, along with in-house designed and manufactured, custom Audio Note (UK) output transformers which feature I-E M4 cores and copper windings. Additionally, it features an exceptionally fine Moving Magnet phonostage which uses three GE 5670 valves, Audio Note (UK) copper foil signal capacitors and its own dedicated, valve regulated and rectified power supply.

In near mint condition. All tubes have been upgraded to higher quality vintage tubes.

Click here for more info.

Click here for full review

The MC275 vacuum tube amplifier is the most iconic amplifier McIntosh has ever made. Originally released in 1961, it became a favourite among audiophiles for its ability to drive power-hungry speakers with impressive power and low distortion levels.

Two-channel, tubed stereo (switchable to parallel mono operation) power amplifier. Tube complement: four KT88, three 12AX7A, four 12AT7. Inputs: 1 pair balanced (XLR), 1 pair single-ended (RCA). Output power: 75Wpc (18.8dBW) into 4, 8, or 16 ohms (stereo), 150W into (21.8dBW) 2, 4, or 8 ohms (mono).

This is an early generation reissue, in great condition. Fully functioning and no need for any repairs or service. 240V operation.

Click here for more info.