Pre-owned Sales (Sold)
The following products are sold. For other sales queries, please contact Cecil Tan (96176046).
Updated: 19 Aug 2025Available Products Pre-owned Search
KEF LS3/5A 11 Ohm (Sold)
Vintage KEF LS3/5A monitor speakers. In excellent condition.
An 11 cm KEF B110C type SP1228 unit is used for the middle and low frequencies up to 3 kHz, and a T27SP1032 tweeter is used for the high frequencies.
In order to completely seal the inside of the enclosure and make it airtight, PVC sheet is used on the edge of the woofer, and the unit is decoupled and sealed.
The network section consists of 26 carefully selected high-quality parts. Each speaker is individually adjusted by computer simulation, and the characteristics of the entire system are strictly controlled within ± 0.25 db of the BBC specification.
The front baffle is made of felt material around the unit to eliminate interference caused by vibration of the cabinet.
The enclosure is made of 12-mm-thick birch material, which is well known as a piano material and has excellent strength. In addition, beech wood is used as a splint for the joint part to increase the internal strength.
An 11 cm KEF B110C type SP1228 unit is used for the middle and low frequencies up to 3 kHz, and a T27SP1032 tweeter is used for the high frequencies.
In order to completely seal the inside of the enclosure and make it airtight, PVC sheet is used on the edge of the woofer, and the unit is decoupled and sealed.
The network section consists of 26 carefully selected high-quality parts. Each speaker is individually adjusted by computer simulation, and the characteristics of the entire system are strictly controlled within ± 0.25 db of the BBC specification.
The front baffle is made of felt material around the unit to eliminate interference caused by vibration of the cabinet.
The enclosure is made of 12-mm-thick birch material, which is well known as a piano material and has excellent strength. In addition, beech wood is used as a splint for the joint part to increase the internal strength.
Lindemann Limetree Bridge II Streamer / Music Server (Sold)
The Limetree BRIDGE II is a high-class network adapter or audio renderer which can transfer music digitally in studio master quality from streaming providers and local storage media to existing D/A converters or other devices with digital inputs. This makes it possible to upgrade an existing hi-fi system with streaming for little money.
The Limetree BRIDGE II is simply connected with the network by means of a LAN cable or via WLAN. It has also a USB port for connecting hard disks or USB storage media. There is an optical and a coaxial digital output. A professional studio engineering sample rate converter makes sure that all streamed formats can be played back on an existing converter without major losses in sound quality.
In as new condition, with original box and all accessories.
Click here for more info.
Click here for full review
The Limetree BRIDGE II is simply connected with the network by means of a LAN cable or via WLAN. It has also a USB port for connecting hard disks or USB storage media. There is an optical and a coaxial digital output. A professional studio engineering sample rate converter makes sure that all streamed formats can be played back on an existing converter without major losses in sound quality.
In as new condition, with original box and all accessories.
Click here for more info.
Click here for full review
Audio Note Conquest Silver Signature (Sold)
The Audio Note (UK) Conquest Mono Power Amplifiers are Pure Class A Parallel Singled Ended valve amplifiers that use a pair of the highly regarded 300B triode valves per channel, producing a level of performance that is radically superior to the vast majority of current designs.
They have been specifically engineered for sonic performance rather than technical specification, and fulfil all Audio
Note (UK) Level 3 criteria: -
*Pure Class A operation
*Zero Negative Feedback
*Single Ended Output Stage
*Valve Rectification
*Directly Heated Triode operation
*Materials and component quality
The Silver Signature version builds upon the already superb performance of the standard CONQUEST, and features the following component upgrades: -
*Audio Note (UK) Copper Foil signal capacitors
*Audio Note (UK) Tantalum film resistors
*Audio Note (UK) IHiB Double C-core output transformers
In near mint condition. This is the later version Conquest SS with the metal AN logo in front.
Click here for more info.
They have been specifically engineered for sonic performance rather than technical specification, and fulfil all Audio
Note (UK) Level 3 criteria: -
*Pure Class A operation
*Zero Negative Feedback
*Single Ended Output Stage
*Valve Rectification
*Directly Heated Triode operation
*Materials and component quality
The Silver Signature version builds upon the already superb performance of the standard CONQUEST, and features the following component upgrades: -
*Audio Note (UK) Copper Foil signal capacitors
*Audio Note (UK) Tantalum film resistors
*Audio Note (UK) IHiB Double C-core output transformers
In near mint condition. This is the later version Conquest SS with the metal AN logo in front.
Click here for more info.
Audio Note M3 Phono Preamplifier (Sold)
The Audio Note (UK) M3 Line Pre Amplifier has been specifically engineered for sonic performance rather than technical specification, and fulfils all Audio Note (UK) Level 3 criteria: -
*Pure Class A operation
*Zero negative feedback
*Single Ended circuit topology
*Valve rectification
*Materials and component quality
The M3 Phono Pre Amplifier features an ECC82 and 5687WB line stage, powered by a 6X5 valve rectified power supply based on the M10‟s Galahad PSU. This power supply also features an ECL82 for voltage regulation and a 5651 for voltage stabilizer. Audio Note (UK) Copper wiring, a mix of our standard and AN(UK) tantalum resistors in key areas, Audio Note (UK) copper foil signal capacitors and our custom electrolytic capacitors are used throughout the circuit, along with in-house designed and manufactured, custom Audio Note (UK) output transformers which feature I-E M4 cores and copper windings. Additionally, it features an exceptionally fine Moving Magnet phonostage which uses three GE 5670 valves, Audio Note (UK) copper foil signal capacitors and its own dedicated, valve regulated and rectified power supply.
In near mint condition. All tubes have been upgraded to higher quality vintage tubes.
Click here for more info.
Click here for full review
*Pure Class A operation
*Zero negative feedback
*Single Ended circuit topology
*Valve rectification
*Materials and component quality
The M3 Phono Pre Amplifier features an ECC82 and 5687WB line stage, powered by a 6X5 valve rectified power supply based on the M10‟s Galahad PSU. This power supply also features an ECL82 for voltage regulation and a 5651 for voltage stabilizer. Audio Note (UK) Copper wiring, a mix of our standard and AN(UK) tantalum resistors in key areas, Audio Note (UK) copper foil signal capacitors and our custom electrolytic capacitors are used throughout the circuit, along with in-house designed and manufactured, custom Audio Note (UK) output transformers which feature I-E M4 cores and copper windings. Additionally, it features an exceptionally fine Moving Magnet phonostage which uses three GE 5670 valves, Audio Note (UK) copper foil signal capacitors and its own dedicated, valve regulated and rectified power supply.
In near mint condition. All tubes have been upgraded to higher quality vintage tubes.
Click here for more info.
Click here for full review
McIntosh MC275 Power Amplifier (Sold)
The MC275 vacuum tube amplifier is the most iconic amplifier McIntosh has ever made. Originally released in 1961, it became a favourite among audiophiles for its ability to drive power-hungry speakers with impressive power and low distortion levels.
Two-channel, tubed stereo (switchable to parallel mono operation) power amplifier. Tube complement: four KT88, three 12AX7A, four 12AT7. Inputs: 1 pair balanced (XLR), 1 pair single-ended (RCA). Output power: 75Wpc (18.8dBW) into 4, 8, or 16 ohms (stereo), 150W into (21.8dBW) 2, 4, or 8 ohms (mono).
This is an early generation reissue, in great condition. Fully functioning and no need for any repairs or service. 240V operation.
Click here for more info.
Two-channel, tubed stereo (switchable to parallel mono operation) power amplifier. Tube complement: four KT88, three 12AX7A, four 12AT7. Inputs: 1 pair balanced (XLR), 1 pair single-ended (RCA). Output power: 75Wpc (18.8dBW) into 4, 8, or 16 ohms (stereo), 150W into (21.8dBW) 2, 4, or 8 ohms (mono).
This is an early generation reissue, in great condition. Fully functioning and no need for any repairs or service. 240V operation.
Click here for more info.
Silbatone S.E.A. represents the following brands: Silbatone Acoustics, PS Audio, Audio Solutions, Audience, Bryston, Reed, Kronos, Gershman Acoustics, Audio Philar, My Sonic Lab, G.I.P. Laboratory and Flux Hifi.
Rogers LS3/5A Original 11 Ohm Version (Sold)
Listed as one of the 12 most significant speakers of all time (the absolute sound September 18th 2010) states that the Rogers LS3/5a offers a: “startling realistic vocal reproduction and a remarkably expansive and box-less sound picture”. The LS 3/5a has stood the test of time as few other speakers have. Ultimately the Rogers LS3/5a has transcended it’s BBC monitor status to become an audiophile legend in its own right.
A true iconic speaker and collector's item! In black ash finish. Current versions of this are selling at well over $4000!
Click here for more info.
Click here for full review
A true iconic speaker and collector's item! In black ash finish. Current versions of this are selling at well over $4000!
Click here for more info.
Click here for full review
McIntosh MC 240 (Sold)
The McIntosh MC240 stereo amplifier is a classic from the golden years of tube audio, a top seller in its time and prized nowadays by collectors and audiophiles.
The MC240 has on one chassis two 40-watt power amplifiers. In addition to use as a stereo amplifier, the flexibility of the MC240 permits it to be used as a monophonic amplifier that delivers 80 watts, or as two separate 40 watt amplifiers with each channel amplifying completely separate programs, or as two amplifiers for use with an electronic crossover network.
Power output:
40 watts per channel into 8Ω (stereo), 80 watts into 2Ω (mono)
Speaker load impedance:
4Ω to 16Ω
Valve complement:
1 x 12AX7, 2 x 12AU7, 2 x 12BH7, 2 x 12AX7, 4 x 6L6GC
This is a vintage McIntosh tube power amplifier from the 60s era. It is a later version by the fact that the speaker terminal strips are located near the middle of the control panel, rather than the left side, as in earlier versions. All tubes are vintage with plenty of life left. In perfect working condition. Very rare in the local market and highly sought-after!
Click here for more info.
Click here for service manual.
The MC240 has on one chassis two 40-watt power amplifiers. In addition to use as a stereo amplifier, the flexibility of the MC240 permits it to be used as a monophonic amplifier that delivers 80 watts, or as two separate 40 watt amplifiers with each channel amplifying completely separate programs, or as two amplifiers for use with an electronic crossover network.
Power output:
40 watts per channel into 8Ω (stereo), 80 watts into 2Ω (mono)
Speaker load impedance:
4Ω to 16Ω
Valve complement:
1 x 12AX7, 2 x 12AU7, 2 x 12BH7, 2 x 12AX7, 4 x 6L6GC
This is a vintage McIntosh tube power amplifier from the 60s era. It is a later version by the fact that the speaker terminal strips are located near the middle of the control panel, rather than the left side, as in earlier versions. All tubes are vintage with plenty of life left. In perfect working condition. Very rare in the local market and highly sought-after!
Click here for more info.
Click here for service manual.
McIntosh MC7108 8-channel Power Amplifier (Sold)
Iconic McIntosh multi-channel power amplifier. Suitable for home theatre applications or to power active speakers with external crossover. Very musical and represents the true McIntosh sound!
FEATURES
*8-Channel Power Amplifier for multizone and home theater systems
*Single-cable connection to CR12 Multizone A/V Control Center
*8 x 40 watts (4 ohms) or 8 x 25 watts (8 ohms)
*Any pair can be bridged for 1 x 100 watts (4 ohms)
*Configurable to 7, 6, 5, or 4 channels
*Theater power configuration: (3 x 100W) + (2 x 40W) Wide powerbandwidth
*Ultra-low distortion
*Exclusive McIntosh Power Assurance System: Power Guard® clipping protection
*Sentry Monitor® current protection
*Thermal Cutout
*Turn-On Delay
*Soft Start inrush protection
*Low-noise toroid power transformer Remote power control
*Gold-plated high-current output terminals Fanless convection cooling
*Modular construction with steel chassis
*Glass front panel with illuminated nomenclature
Click here for more info.
Click here for owner's manual
FEATURES
*8-Channel Power Amplifier for multizone and home theater systems
*Single-cable connection to CR12 Multizone A/V Control Center
*8 x 40 watts (4 ohms) or 8 x 25 watts (8 ohms)
*Any pair can be bridged for 1 x 100 watts (4 ohms)
*Configurable to 7, 6, 5, or 4 channels
*Theater power configuration: (3 x 100W) + (2 x 40W) Wide powerbandwidth
*Ultra-low distortion
*Exclusive McIntosh Power Assurance System: Power Guard® clipping protection
*Sentry Monitor® current protection
*Thermal Cutout
*Turn-On Delay
*Soft Start inrush protection
*Low-noise toroid power transformer Remote power control
*Gold-plated high-current output terminals Fanless convection cooling
*Modular construction with steel chassis
*Glass front panel with illuminated nomenclature
Click here for more info.
Click here for owner's manual
Flux Hifi Turbo Record Cleaner (Sold)
The FLUX-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.
For this purpose, a special cyclone with replaceable filter was developed, which makes it possible to realize a strong suction performance despite the small housing size (dimension 125 x 122 x 64mm). Surface dust, as well as the dirt that sits deep in the groove, is extracted without residue within a few revolutions.
Only when the LP is free of dust can the pickup system scan the record without interference and distortion.
Brand new in the box. Never used.
Click here for more info.
For this purpose, a special cyclone with replaceable filter was developed, which makes it possible to realize a strong suction performance despite the small housing size (dimension 125 x 122 x 64mm). Surface dust, as well as the dirt that sits deep in the groove, is extracted without residue within a few revolutions.
Only when the LP is free of dust can the pickup system scan the record without interference and distortion.
Brand new in the box. Never used.
Click here for more info.
Scansonic MK-5 Stand-mounted Speakers (Sold)
Scansonic’s MK-5 is a compact two-way mini-monitor, featuring a sealed ribbon planar magnetic tweeter found in the brand’s Raidho-inspired M-series.
That tweeter’s membrane is formed by a Kapton-aluminium sandwich just 20µm thick. The bonus here is that it has an extremely low mass - approximately 50 times less than any conventional textile, ceramic, beryllium or diamond dome.
The tweeter is paired with a brand new 4.5-inch Kevlar coned mid/bass driver (hence the ‘K’ in ‘MK-5’) with underhung magnet system.
In pristine condition, with original box and manual.
Click here for more info.
That tweeter’s membrane is formed by a Kapton-aluminium sandwich just 20µm thick. The bonus here is that it has an extremely low mass - approximately 50 times less than any conventional textile, ceramic, beryllium or diamond dome.
The tweeter is paired with a brand new 4.5-inch Kevlar coned mid/bass driver (hence the ‘K’ in ‘MK-5’) with underhung magnet system.
In pristine condition, with original box and manual.
Click here for more info.
©2025 Silbatone S.E.A. All Rights Reserved.