Premier delivers excellent performance, and also represents outstanding value-for-money. No compromise has been made in relation to the quality of parts and materials used in its construction.

CONSTRUCTION: The conductors are in a parallel construction with a slight rotational twist. This established technique remains the first line of defence against RFI and EMI rejection.

A) Conductors: Silver plated 99.9999% OFC conductors offer an exceptional level of purity with enhanced conductivity. They are less likely to fracture (compared to solid core) or degrade over time. Silver is an excellent conductor and when combined with a high purity copper provides impressive electrical properties.

B) Dielectric: Teflon FEP (Fluorinated Ethylene Propylene) dielectric (insulation) is chemically inert and has a very low dielectric constant over a wide frequency range. FEP possesses a very high degree of stress crack resistance and a low coefficient of friction making it an exceptional dielectric. FEP is the first choice for safety in both temperature and electrical insulation.

C) Filler: Cotton filler has been used to give the cable internal strength and reduce microphony. Cotton also possesses excellent dielectric properties, the best of a solid material.

D) Wrap: A paper wrap is used to secure the construction prior to the application of a flexible PVC jacket. The addition of the paper and cotton form a buffer with the PVC so as to maintain exceptional dielectric properties.

E) Jacket: PVC is used as the outer jacket to give a high degree of flexibility and mechanical strength.

TERMINATION: Premier cable is terminated using IsoTek’s bespoke Audiophile grade moulded connectors of solid OFC with 24ct gold plated conductors. These offer the highest quality performance and are less prone to tarnish.

2 pcs available. 1.5m with UK 3 pin plug.

Click here for more info.

Built in a laminated birch plywood box that appears to be identical to that of the LS3/5a, the Rogers Studio 3 keeps the older speaker's inset baffle. Mounted on the baffle, however, are completely different drive-units: a 19mm fabric-dome, ferrofluid-cooled tweeter from SEAS, crossed over at 3kHz to a 110mm woofer of Rogers's own manufacture.

A little less accurate than a 3/5A maybe, the Studio 3 is altogether faster, bouncier and in its way more fun. It’s almost as though Rogers have managed to combine some of the better characteristics of the contrasting 3/5A and Linn Kan 2 designs in one single model.

Click here for full review

Vintage Fidelity Research FR-54 9" tonearm, in excellent condition and comes with original box, lead-out cable and mounting template. The anti-skating weight is still attached to the arm pipe. Headshell is NOT included.

This is a very rare item and is a collector's item. Highly sought-after! Get it before its gone!

Specifications:

Effective length: 245mm

Mounting distance: 230mm

Overhang: 15mm

Offset angle: 21.5 degrees

Null points: 59/120mm

Mounting hole: 21mm

Effective mass: 16g

Click here for more info and owner's manual.

Click here for user comments

Nucleus is the center of your Roon music system. It’s the housekeeper, the traffic cop, and the brain that takes care of the music in your life. Using Nucleus, Roon manages all your music – on hard drives, NAS, and streaming content – and allows you to play it on all the audio devices around your home. Nucleus is the best way to run Roon, at any price.

As well as distributing music throughout your home, Nucleus also offers the very finest performance possible when connected to a USB DAC. A computer source has never sounded this good before.

In excellent condition, hardly used. Comes with external power supply. Please Note! The Roon Nucleus needs a Roon account with an active subscription to operate.

Click here for more info.

The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material). The cone shape TPE columns carry a SANDWICH subchassis out of Carbon Fibre and MDF composite with ultimate rigidity.

The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50%

In near mint condition, with matching tonearm and all original packing. Cartridge is NOT INCLUDED.

Click here for more info.

Click here for full review

Statement Power Cable

.Custom-machined male and female connectors
.New tight-gripping ''alligator''s jaw'' IEC
.New removable ground pin on male connector
.New round cross section for greater flexibility
.Solid core OFC plus finely stranded OFC conductor array
.6-gauge conductor array
.Multiple shields (two braided, two foil)
.Conductive PVC shield
.Ferrite impregnated jacket
.Hermetically sealed constructed
.Cold and hot fused terminations

Click here for full review

The 803 Diamond might look almost as imposing as the 802 Diamond, but thanks to its smaller footprint and more traditional cabinet design, it will fit more easily into a home environment. With three Rohacell 7” bass drivers it delivers almost as much bass as the 802 Diamond, filling even the largest of domestic rooms with rich, lifelike sound.

Technical Specifications
*Free-mounted diamond dome tweeter
*Nautilus™ tube tweeter loading
*Quad magnet tweeter motor
*Kevlar® brand fibre cone FST™ midrange
*Rohacell® cone bass
*Dual magnet bass driver motor
*Matrix™ cabinet
*Flowport™

Comes with the standard speaker grills and added-on IsoAcoustic Gaia isolation footers.

Click here for review

Near mint condition Garrard 301 on custom-made plinth, packaged with SME 3009R and rare SAEC WE-407 tonearms. A rare opportunity to acquire this unique plinth design. Comes fitted with IsoAcoustic Gaia isolation footers.

The NA-11S1 Premium Network Audio player is arguably the most advanced, next-generation player there has ever been. Its introduction to this year’s Premium collection is a true milestone in the Marantz history and is a momentous occasion for every audiophile.

It is now possible to enjoy new media on the highest of levels, by utilizing the increasingly available high resolution downloads it creates ‘studio master’ quality right in your own living room. It produces such breath-taking audio quality because inside it includes the High Current Audiophile D/A converter DSD1792 as well as a Marantz original DSP and Digital Filter PEC777- a high-end algorithm previously used only in professional recording studios - we call it Marantz Musical Mastering. This type of filtering retains greater detail for an even wider sound stage and a perfect balance.

Can be used as a full-function streamer to play Tidal, Spotify or internet radio. In mint condition, with remote control, owner's manual and original box.

Click here for more info.

Click here for full review

The KEF LS50 projects a hyper-realistic soundstage with its unique Uni-Q drivers, capable of faithfully reproducing your music's highest highs and lowest lows as true to the original recording as possible. Even the LS50's cabinet is designed to deliver a perfect listening experience, with its curved baffle to provide smooth on-and-off-axis response, and innovative bracing to prevent cabinet coloration.

Click here for more info.

Click here for full review