The SQ-102 Mk.II is a phono-only preamplifier incorporating various refinements that
emerged in the course of our R&D programs. The new SQ-102 features a new twist on JC Morrison’s transconductance amplifiers using the German Post D3a. The all-important input stage sets the noise figure of the entire system and does much to establish its character. This first stage can swing 45V and the gain window is optimized for headroom to lessen record noise.

The phono EQ is craftily incorporated into the input stage circuitry as opposed to a separate lumped filter stage driven by the input stage, as found in most non feedback RC and LCR based preamps. This topology minimizes series components and enhances the dynamic and nuanced presentation we have come to expect from the D3a transconductance circuit.

Those who've listened to a Silbatone component will know instinctively that they are special. This is no different for the SQ-102 phono stage. A rare opportunity to own one at a now affordable price.

Click here for more info.

Specifications
Three-way, reflex-loaded, floorstanding loudspeaker

Drive-units:
• 1" (25mm) ring-radiator tweeter
• 5.5" (140mm) paper-cone midrange unit
• Two 6" (153mm) paper-cone woofers

Crossover frequencies:
Not specified

Crossover filters:
First-order, "optimized for acoustic phase response."

Frequency Range:
32 Hz - 40 kHz

Sensitivity:
90 dB/2.83V/m

Nominal impedance:
4 ohms

Power handling:
50 - 300W without clipping

Still in excellent condition, with grills and spikes included.

Click here for full review

Previous top model Kondo pure silver speaker cable, terminated with Kondo silver pins on both ends. 80 strands of pure silver litz wires per channel.

In excellent condition, with original box and certificate. Please note that this is the later red jacket version. The earlier version is brown coloured.

Also note that this pair comes with high quality Furutech FP-202G gold plated banana connectors. If there are detached, you will see the original Kondo silver pin terminations.

Click here for review

Earlier generation Tchernov power cord for sale. Still in great condition and an excellent value at this price! 1.75m

The Raidho Acoustics C-2.2 is a 2.5-way floorstanding loudspeaker. It is built with the same unique qualities as the C-1.1, but with a somewhat larger cabinet and an additional Raidho Ceramix Driver. This relieves the workload on the upper Ceramix Driver, which results in a deeper bass and an even higher dynamic headroom. The extended bass frequency and the larger dynamic contrasts give the music performance more substance and a very natural tone colour.

SPECIFICATIONS

Size (WxHxD): 200 x 1055 x 470 mm (320 x 1150 x 510 mm incl. spikes)
Weight: 43,5 Kg
Freq. response 40 Hz – 50 KHz
Impendence: >4 ohm
Sensitivity: 86 dB 2.83 V/m
Crossover: 150 kHz 3 kHz 2. order
Enclosure: Vented design Port in rear panel
Drive units: 1 sealed ribbon tweeter 1 115 mm Ceramic mid-bass driver 1 115 mm Ceramic bass driver

In mint condition and looks like new! Amazing big, full-range sound in a compact cabinet. Must hear to believe!

Click here for more info.

Ansuz develops and manufactures cables based on advanced, cutting edge technologies. Ansuz cables deliver a pure signal flow that unleashes the authentic sound originally intended by the master recording. To achieve this, it is imperative to lower resistance, curb induction and reduce noise floor to a minimum. The more advanced the cable series, the more refined and sophisticated the implemented technologies, and the more transparent, holistic and authentic the resulting soundstage.

In mint condition, with original leather carrying case. Please note, this is the 20A version with C19 IEC connector.15A version also available, at the same asking price.

TUNAMI is a powerful, high-speed and dynamic power cable of a new generation. The short-pitch stranded PCOCC-A wire which has 5.5sq cross-section area actualizes high-power signal transmission. Its cable voltage endurance is 600V and maximum amperage is 30A. For noise protection, we specially developed the triple-layered shielding structure. It not only rejects internal and external noise, but also instantaneous spark noise due to vibration.

From the deep stillness of TUNAMI GPX-R, you can even sense the atmosphere of pre-performance of sound source.

Click here for more info.

Click here for review

The Manley 250 Watt Monoblocks are some of our most powerful push-pull production-models.

Both the circuit design and the selected componentry have been refined over years and years of development. Reliability that you can depend upon combined with musical accuracy and emotional authority is what these amplifiers promise- and deliver. They are able to switch operation modes allowing the listener to choose between the sonically seductive qualities of triode and the more powerful tetrode configuration. We use big, beefy reservoir capacitors in the high voltage supplies giving plenty of instant energy for dynamic performance of transient peaks and bass impact and weight which often exceeds that of rival solid-state amplifiers. We run high voltages on the plates of the output tubes but operate them at lower current which will result in their longer life.

In our own in-house magnetics department, our team completely redesigned all of our output transformers with the goal to reclaim that luscious rich mid-range of our vintage designs. We also specifically set out to achieve a deeper bottom register at higher power with lower distortion.

In excellent condition, this pair of monoblocks has been fully serviced and re-biased by a competent technician. Guaranteed in perfect working condition.

Click here for full review

The HRS Damping Plate incorporates a highly effective design to eliminate component chassis noise revealing a new level of musical performance. They are precision manufactured from billet-machined aircraft aluminum and proprietary HRS polymers. A very specific amount of mass, stiffness, and damping from these products eliminate chassis resonance problems and transform residual chassis energy to heat. This is a special system utilized by audiophiles and industry professionals as their reference chassis noise reduction system.

In mint condition, with original box.

Click here for more info.

The technology of cryogenic treatment unleashes its full potential in this appliance, providing a nearly-no-resistance pathway for electricity. The thick chassis is manufactured with state of the art machining and craftsmanship, from a single piece of aircraft-grade aluminium alloy. It acts just like a perfect shield against different kinds of interference. The product delivers the cleanest current to the receiving equipment.

In almost new condition, as shown in the pics. This is the flagship distributor from SINE.

Click here for more info.