Pre-owned Sales (Sold)
The following products are sold. For other sales queries, please contact Cecil Tan (96176046).
Updated: 25 Mar 2025Available Products Pre-owned Search
Audio Note AN-V RCA 1.5m (Sold)
Audio Note UK pure silver litz interconnect with original Audio Note AN-GP silver plugs. 1.5m pair
Click here for review
Click here for review
Air Tight ATC-2 (Sold)
The Airtight ATC-2 is a true, no-holds-barred, reference line stage. The rave reviews it's garnered since it's introduction have been unanimous in their praise of the ATC-2s superb transparency, amazing resolution of detail, beautiful craftsmanship, and ease of use. As with all Air Tight electronics, the ATC-2 is designed without printed circuit boards and is hand wired, point-to-point, for the purest signal path imaginable.
Click here for more info.
Click here for review
Click here for more info.
Click here for review
Air Tight ATM-4 (Sold)
PERFECT PURSUIT OF SONIC PERFORMANCE
*Reputed 6L6GC beam-valve boasting of long history starting from military application
*UL connection enabling to offer affluent power and guts
*Low NF design for low distortion
*Adjuster pot & centre meter to assure optimum balance of push-pull operation
*Stereo/mono selector switch
*Select components for long-time listening pleasure
In near mint condition. Please Note: this unit is rated for 100v operation only! A high quality step-down transformer is included with the price.
Click here for more info.
*Reputed 6L6GC beam-valve boasting of long history starting from military application
*UL connection enabling to offer affluent power and guts
*Low NF design for low distortion
*Adjuster pot & centre meter to assure optimum balance of push-pull operation
*Stereo/mono selector switch
*Select components for long-time listening pleasure
In near mint condition. Please Note: this unit is rated for 100v operation only! A high quality step-down transformer is included with the price.
Click here for more info.
XLO Signature Digital XLR 1m (Sold)
XLO Signature Digital Cable XLR 1 Meter. In great condition, with original packing
Entreq Tellus II Infinity Ground Box with Eartha Ground Cables (Sold)
The original Tellus II was a very flexible ground box, It had 3 posts on all of which were completely isolated from one another, which makes it incredibly flexible to use within a system. The 2 outside ground posts on the original Tellus 2 were Silver Minimus and the centre post was a Silver Minimus with an Atlantis Minimus integrated into it (think of it as a turbocharged Silver Minimus).
The Tellus II Infinity follows the same concept, there are still 3 posts and there are all independent to one other, but on this version, the 2 outside posts are Silver Minimus Infinity and the centre post is now a single Olympus Ten!
In mint condition and looks like new. Packaged with 5 pcs Eartha Infinity Ground Cables. Original box also included.
Click here for more info.
Click here for full review
The Tellus II Infinity follows the same concept, there are still 3 posts and there are all independent to one other, but on this version, the 2 outside posts are Silver Minimus Infinity and the centre post is now a single Olympus Ten!
In mint condition and looks like new. Packaged with 5 pcs Eartha Infinity Ground Cables. Original box also included.
Click here for more info.
Click here for full review
Silbatone S.E.A. represents the following brands: Silbatone Acoustics, PS Audio, Audio Solutions, Audience, Bryston, Reed, Kronos, Gershman Acoustics, Audio Philar, My Sonic Lab, G.I.P. Laboratory and Flux Hifi.
Silbatone SQ-102 MK II (Sold)
The SQ-102 Mk.II is a phono-only preamplifier incorporating various refinements that
emerged in the course of our R&D programs. The new SQ-102 features a new twist on JC Morrison’s transconductance amplifiers using the German Post D3a. The all-important input stage sets the noise figure of the entire system and does much to establish its character. This first stage can swing 45V and the gain window is optimized for headroom to lessen record noise.
The phono EQ is craftily incorporated into the input stage circuitry as opposed to a separate lumped filter stage driven by the input stage, as found in most non feedback RC and LCR based preamps. This topology minimizes series components and enhances the dynamic and nuanced presentation we have come to expect from the D3a transconductance circuit.
Those who've listened to a Silbatone component will know instinctively that they are special. This is no different for the SQ-102 phono stage. A rare opportunity to own one at a now affordable price.
Click here for more info.
emerged in the course of our R&D programs. The new SQ-102 features a new twist on JC Morrison’s transconductance amplifiers using the German Post D3a. The all-important input stage sets the noise figure of the entire system and does much to establish its character. This first stage can swing 45V and the gain window is optimized for headroom to lessen record noise.
The phono EQ is craftily incorporated into the input stage circuitry as opposed to a separate lumped filter stage driven by the input stage, as found in most non feedback RC and LCR based preamps. This topology minimizes series components and enhances the dynamic and nuanced presentation we have come to expect from the D3a transconductance circuit.
Those who've listened to a Silbatone component will know instinctively that they are special. This is no different for the SQ-102 phono stage. A rare opportunity to own one at a now affordable price.
Click here for more info.
Sonus Faber Cremona (Sold)
Specifications
Three-way, reflex-loaded, floorstanding loudspeaker
Drive-units:
• 1" (25mm) ring-radiator tweeter
• 5.5" (140mm) paper-cone midrange unit
• Two 6" (153mm) paper-cone woofers
Crossover frequencies:
Not specified
Crossover filters:
First-order, "optimized for acoustic phase response."
Frequency Range:
32 Hz - 40 kHz
Sensitivity:
90 dB/2.83V/m
Nominal impedance:
4 ohms
Power handling:
50 - 300W without clipping
Still in excellent condition, with grills and spikes included.
Click here for full review
Three-way, reflex-loaded, floorstanding loudspeaker
Drive-units:
• 1" (25mm) ring-radiator tweeter
• 5.5" (140mm) paper-cone midrange unit
• Two 6" (153mm) paper-cone woofers
Crossover frequencies:
Not specified
Crossover filters:
First-order, "optimized for acoustic phase response."
Frequency Range:
32 Hz - 40 kHz
Sensitivity:
90 dB/2.83V/m
Nominal impedance:
4 ohms
Power handling:
50 - 300W without clipping
Still in excellent condition, with grills and spikes included.
Click here for full review
Kondo KSL-SPz 2m Pair (Sold)
Previous top model Kondo pure silver speaker cable, terminated with Kondo silver pins on both ends. 80 strands of pure silver litz wires per channel.
In excellent condition, with original box and certificate. Please note that this is the later red jacket version. The earlier version is brown coloured.
Also note that this pair comes with high quality Furutech FP-202G gold plated banana connectors. If there are detached, you will see the original Kondo silver pin terminations.
Click here for review
In excellent condition, with original box and certificate. Please note that this is the later red jacket version. The earlier version is brown coloured.
Also note that this pair comes with high quality Furutech FP-202G gold plated banana connectors. If there are detached, you will see the original Kondo silver pin terminations.
Click here for review
Tchernov High Current Power Cord (Sold)
Earlier generation Tchernov power cord for sale. Still in great condition and an excellent value at this price! 1.75m
Raidho C-2.2 Loudspeaker (Sold)
The Raidho Acoustics C-2.2 is a 2.5-way floorstanding loudspeaker. It is built with the same unique qualities as the C-1.1, but with a somewhat larger cabinet and an additional Raidho Ceramix Driver. This relieves the workload on the upper Ceramix Driver, which results in a deeper bass and an even higher dynamic headroom. The extended bass frequency and the larger dynamic contrasts give the music performance more substance and a very natural tone colour.
SPECIFICATIONS
Size (WxHxD): 200 x 1055 x 470 mm (320 x 1150 x 510 mm incl. spikes)
Weight: 43,5 Kg
Freq. response 40 Hz – 50 KHz
Impendence: >4 ohm
Sensitivity: 86 dB 2.83 V/m
Crossover: 150 kHz 3 kHz 2. order
Enclosure: Vented design Port in rear panel
Drive units: 1 sealed ribbon tweeter 1 115 mm Ceramic mid-bass driver 1 115 mm Ceramic bass driver
In mint condition and looks like new! Amazing big, full-range sound in a compact cabinet. Must hear to believe!
Click here for more info.
SPECIFICATIONS
Size (WxHxD): 200 x 1055 x 470 mm (320 x 1150 x 510 mm incl. spikes)
Weight: 43,5 Kg
Freq. response 40 Hz – 50 KHz
Impendence: >4 ohm
Sensitivity: 86 dB 2.83 V/m
Crossover: 150 kHz 3 kHz 2. order
Enclosure: Vented design Port in rear panel
Drive units: 1 sealed ribbon tweeter 1 115 mm Ceramic mid-bass driver 1 115 mm Ceramic bass driver
In mint condition and looks like new! Amazing big, full-range sound in a compact cabinet. Must hear to believe!
Click here for more info.
©2025 Silbatone S.E.A. All Rights Reserved.