Most audiophiles know that vibration control is essential to proper audio reproduction, but many overlook the most resonant part of any component, the top plate! The Resonator was created in collaboration with the University of Applied Sciences Dortmund specifically for removing chassis vibration and resonance in the critical 300 - 500Hz range, restoring harmonic balance and resolution.

Imagine how much resolution your components could retrieve if the chassis, and by association, the internal circuitry, was not being violently shaken. Strategically placing the Resonator in a resonant zone on your component's chassis, can reduce vibration by more than 20dB!

The way the Resonator works is quite simple. There are certain "zones" of a component's chassis that will be more resonant than others, simply place the resonator in one of these zones. The base of the Resonator channels vibrational energy up the graded center pole piece. Vibration then travels down 6 fanlike horizontal blades, each of which vibrates independently up and down, converting mechanical energy into small amounts of heat.

In mint condition, with original wooden presentation box. This is the latest, more effective version with "1000 Hz" written on the top.

Click here for full review

Amplifier stand with tempered glass top and stainless steel pillars. Able to hold up to 50 kg.
In near mint condition! 2 pcs available.

The KS 2020 pure silver digital cable incorporates the most advanced research in the fields of magnetics, materials science and the nature of digital signals. KS 2020 uses Black Pearl silver conductors in Kimber's proprietary format. Imagine detail without the edge and presence free of exaggeration. Music flows with purity and ease, making KS 2020 the definitive choice in S/PDIF digital transmission.

In near mint condition, with original carry case.

Click here for more info.

The Benz Micro MC Gold is a low output moving coil at .4mV at 3.54cm/sec, perfectly suited for moving coil phono stages with 60dB or higher gain. Benz Micro applies very specific requirements in terms of tracking force, weight, impedance, output and compliance.

The design of the Benz Micro MC Gold is true to the brand’s values, using the best components to achieve the best results in terms of dynamics and timbre.

Specifications
- Output: 0.5mV
- Stylus Shape: .3x.7mil
- Internal Impedance: 120 Ohm
- Recommended Loading: >1200 Ohm
- Weight: 5.7Gms
- Compliance: 15
- Tracking Range: 1.7 - 2.0

Current model and in excellent condition. Very low playing hours. Comes packaged with Denon plastic casing.

Click here for more info.

The PA-1A’s dual-mono, Class-A, all-tube design has an industry leading signal-to-noise ratio and represents an all-out assault on the state-of-the-art. Don’t miss out on the tonal qualities you love about analogue reproduction – get to know your vinyl all over again through the PA-1A high-performance, vacuum-tube preamplifier.

Click here for full review

A single-driver design using the famous and very popular full-range Fostex FE108EZ 4" driver. At 92dB efficiency and 8 ohms, they are easy to drive with any amplifier and they especially match low powered tube amplifiers very well.

Specifications:
Single-driver small tower speakers
Vflex turbo-charging sub-bass technology
Natural sound Fostex FE108E Sigma 4" driver
Machined front and back baffles with surface vibration breaking V grooves
Minimal coloration through sturdy, heavily braced cabinets
Inside baffle panel asymmetric focal grooves break and spread standing sound wave
Gold plated Cardas multi function terminals
Tripod footing with integrated adjustable spikes
Sensitivity: 92dB 1W/1m
Impedance: 8 ohms
Recommended amplifier power: From 3.5 watts (tube amp friendly)
Frequency response: 20 - 18,000 Hz
Dimensions: 36" H x 10" W x 16" D
Weight: 80 pounds each (36 kg each)

Click here for full review

The P10 was the previous top model Power Plant. With 5 separate regenerated zones and 1500 watts of pure regenerated power, the P10 can handle any size system you want to power. From medium to large power amplifiers to the smallest pieces of source equipment, the P10 will work magic on your system’s performance. Only the very finest high-end system around the world use the P10 Power Plant and this is the piece to strive for.

In near mint condition. Comes with remote control and owner's manual.

Click here for more info.

Click here for full review

Legendary Kondo Labs current model copper-litz interconnect terminated with XLR connectors. 1.5m pair. One of the most musically engaging cables on the market today.

Still in excellent condition and comes with original box and certificate.

Click here for more info.

Kondo Labs age-annealed pure copper-litz RCA interconnect cable. Hand-made in Japan.

In mint condition, with original box and certificate.

Click here for more info.

The MC225 has on one chassis two 25watt power amplifiers. In addition to use as a stereo amplifier, the flexibility of the MC225 permits it to be used as a monophonic amplifier that delivers 50 watts, or as two separate 25 watt amplifiers with each channel amplifying completely separate programs, or as two amplifiers for use with an electronic crossover network.

This classic vintage amplifier is in truly excellent condition! Fully tested and guaranteed that all parts are original and in perfect working condition! Tubes supplied are all vintage, not cheap current product crap. Comes package with a high quality Sunfire voltage stepdown transformer.

Click here for more info.

Click here for user comments