The TS Series vibration isolation systems from Herzan deliver sub-hertz active vibration isolation in all six degrees of freedom.

The TS Series has a simple 'plug and play' design that enables researchers to focus on the key research application. The stiffness of the system provides better directional and positional stability, thereby ensuring a controlled and stable measuring environment.

The main features of the TS Series vibration isolation systems are:

*Easy integration
*LCD display provides real time results
*Plug and play system
*Complete isolation performance
*No installation or maintenance required
*Advanced piezoelectric sensory technology delivers excellent isolation performance
*Sub-hertz active vibration isolation across all *six degrees of freedom

"So my TS 140 arrived today and I have listened to an Orchestral piece so far. To say the change is nothing short of dramatic would be an understatement. The improvement in clarity, transparency is stunning. The soundstage has widened and deepened considerably. With active isolation disabled, the table functions as a passive device like a vibraplane. The improvement was apparent is passive mode. Active brings it to a new level." - owner comments

In mint condition and looks like new! Comes with original box. Very rare on the 2nd hand market.

Click here for more info.

Click here for user manual

Click here for Youtube video

The Premier is our most popular standard turntable and is available in a number of variants. It has been conceived as a heavyweight turntable distinguished by individual design details.

The legendary bearing developed by Thomas Scheu is an inverted precision platter bearing (the spindle is situated on the base while the bearing shell is inside the platter) made of 100Cr6 ball bearing steel with a contact surface hardness of 62 HRC and bearing tolerance range h6/H6, as used in other Scheu turntables.

The Premier will play in combination with any tonearm marketed in the world – easily, effortlessly and with great depth. Depending on the combination of system and tonearm, the tonal colour can be rich and the bass reproduction impressively deep.

Similar to the SME IV arm, the turntable is in near mint condition. The SME IV tonearm comes with original box, lead-out cable, owner's manual and all accessories.

Click here for more info on Scheu TT

Click here for more info on SME IV

Click here for full review of TT

Affordable cinema-quality entertainment for any room. Create a spectacular cinematic experience in your own home. The VPL-HW45ES is packed with technology developed for our professional Digital Cinema projectors, including SXRD panels and Advanced Reality Creation upscaling technology for fabulously detailed Full HD images. With 1,800 lumen brightness and compact design, it's the perfect choice for unforgettable home entertainment.

Features

*1,800 ANSI lumens brightness
*Reality Creation
*Long-lasting lamp up to 6,000 hours
*Wireless HDMI compatible (optional accessory)
*SXRD panels and advanced Iris 3 technology
*Built-in RF 3D Sync transmitter

Fully functional and in excellent condition. Comes with remote control and ceiling mount bracket.

Click here for more info.

Click here for user manual

The p1 differ from conventional loudspeakers. Instead of a conventional midrange and tweeter, a chassis is responsible for all frequencies from the lower midrange to the very highest tones - the star-shaped Manger sound transducer.
In addition to its bandwidth, the handcrafted Manger sound transducer impresses with its natural sound quality and the authentic reproduction, a basic requirement for faithfully reproducing the filigree string play of a violin or the temporal interplay of an orchestra.

Quality down to the smallest element - this maxim runs like a red thread through the p1.

First-class components in the crossover guarantee maximum fidelity. Cross-section cables ensure loss-free signal transfer. The connection terminals, WBT nextgen™ speaker sockets, are of exquisite quality and easily accessible. Loudspeaker cables with banana plugs or cable lugs find permanent, secure contact. The Manger cf1 loudspeaker feet made of precision plastic ensure stable contact with the ground and, at the same time, convenient fine adjustment. Last but not least, the chassis and the connection terminal are precisely embedded in the body via long-term stable threaded screws. Uncompromising quality that you can see, feel and hear.

Click here for more info.

Click here for full review

The TD-550 is the previous flagship turntable from Thorens. The concept behind the TD 550 was to develop Thorens` classic suspended chassis design to its ultimate expression, with emphasis firmly on sonic performance and luxurious design.

The TD-550 is a true heavyweight turntable, with 6.3kg platter, and provides a combination of the best assets of high mass and suspension isolation to the benefit of sound quality.

The TA-210 tonearm is the 12" version of their new range of arms with special resonance damping.

In brand new condition and never used! Only taken out for photo taking. Comes complete with acrylic cover and all accessories.

Click here for more info on TD-550.

Click here for more info on TA-210 arm.

Click here for full review

The ultimate experience in phono pre-amplification

*Connect up to three different tonearms/cartridge combinations
*Simple switching from Moving Coil to Moving Magnet cartridges
*Stepwise Gain control: 40-50-60-66 db
*Over 120 options to optimize Moving Coil loading impedance
*Over 20 options to optimize Moving Magnet capacitance
*Standby, Mute and Run options
*Stereo/Mono; Polarity; Low Pass filter options
*Unique ability to accurately set and correct cartridge azimuth alignment

The rear panel continues the unprecedented versatility of the Phono II. All three inputs and outputs can be operated through single ended (RCA connectors) or balanced (XLR) operation. AC can be accessed through the supplied shielded cable or by the user’s choice. The Phono II also allows for the user to customize parameters to accommodate cartridges with unusual loading requirements.

All models now include specially modified "RiZE" footers from CRITICAL MASS SYSTEMS.

In mint condition and looks like new! Comes with original box and owner's manual. Still current model.

Click here for more info.

Click here for full review

The heart of this new design is the unique 4-point bearing. The 4Point from other tonearms by introducing several new and unique features. The new zero-play bearing is configured on 4 points. The 4POINT tonearm has an effective length of 280mm (11-inch), a very precise VTA adjustment facility and fits Kuzma's standard mount with a 212mm pivot-to-spindle distance. Two points (which are similar to a uni-pivot bearing) allow and control vertical movements of the tonearm. The other set of two pointed bearings allow and control horizontal (lateral) movements of the tonearm. All four points of the bearing have minimal friction and zero-play in all planes of movement, thus ensuring that the cartridge platform and the cartridge itself follow the grooves of an LP with extremely low friction and minimal vibrations.

Features
*Bias adjustment
*Optional light and heavy counterweight
*Separate vertical and horizontal damping
*Detachable headshell
*XLR, 5 pin, or single options

In near mint condition, with original box and owner's manual. This item comes with the extra cost Cardas Clear lead-out cable and ETI Silver Bullet RCAs.

Click here for more info.

Click here for full review

The M3X Isolation Base is the latest generation of reference level Isolation Bases from Harmonic Resolution Systems. It is manufactured from six different materials including two proprietary polymers, billet machined aircraft aluminium and polished black granite.

A finely polished black granite contact plate is combined with two custom resonance control stages in a billet machined aircraft aluminum frame with a craftsmanship finish and black anodize coating. This exceptional design was created to offer maximum performance, cosmetic elegance, and a durable scratch resistant inlay design that will provide years of maintenance free service.

. Broadband noise reduction system maximizes performance.
. Highly effective on wide range of surfaces and structures.
. Low profile compact design minimizes space requirements.
. Integrates directly into HRS audio stands without modification (M3X-1719, M3X-1921 sizes).

In mint condition and looks like new! Comes packaged with the SXR 1921-1V frame for floor placement and ultimate resonance isolation.

Click here for more info.

Click here for full review

An incredibly powerful amplifier from Krell. So much so that it uses a 20 Amp power cord AND industrial type breaker for a power switch to match its internal 5000 VA power supply.

Contains balanced, single ended, and proprietary Krell CAST type connectors for input, and includes wing-nut type speaker posts for the outputs.

Provides an incredible 400W into 8 Ohms and 1600W into 2 Ohms. Highly biased into Class A to give a warmer and richer tonal balance compared to earlier Krells.

Click here for full review

The Kronos Sparta is a revolutionary design with a patented dual counter-rotating platter system on a suspended chassis. Speed regulation is controlled by continuous open loop feedback, with optical diode sensor for the top motor. Platter speed is user adjustable from the independent speed control/power supply unit.

This unit comes with the upgraded Super Capacitor power supply (SCPS) that completely elevates the overall performance of the whole turntable.

Mounted with the Kuzma 4Point 9" tonearm and Transfiguration Phoenix MC cartridge. Sold as a package.

In near mint condition as shown in the pics!

Click here for more info on Kronos Sparta

Click here for more info on Kuzma 4Point 9" arm

Click here for full review of Kronos Sparta