Pre-owned Sales (Sold)
The following products are sold. For other sales queries, please contact Cecil Tan (96176046).

Updated: 25 Apr 2024

Available Products  Pre-owned Search   
 
 
 
Kondo KSL-SFz (Sold)
The KSL-SFZ employees a newly developed core material for further improvement of sound that is free feeling and open. It boasts both stunning fresh sound and delicate expression with wide dynamic range.It is the ultimate pleasure for any analog lover.

PURE SILVER WIRE-WOUND TRANSFORMERS

Finer structure of coil windings is used to control the peak within a 1.5db level up t0 100khz without requiring a termination resistor in a secondary side.

EXTREME THIN PERMALLOY CORE

A large core built up with custom made ultra thin permalloy layers is employed. This controls and hold down eddy current loss and hysteresis loss to gain up to 100khz. The core form has a wide sectional area and short magnetic circuit path to assure ultra low frequencies maintain extremely low distortion.

In absolutely mint condition, with built-in KSL-VzII pure silver lead-out cable. Rated as probably the best MC step-up transformer ever made and very rarely seen on the 2nd hand market!

Click here for more info.
Kondo KSL-SFz
 
 
Kondo KSL-M77 (Sold)
The ultimate all-silver wired, hand-made tube preamplifier with phono stage. A true work of art!

Strong power supply with low impedance is constructed with 2 power transformers, choke and audio grade capacitors. CR type phono equalizer and zero feedback line amplifier reproduce acoustic field with natural and liveliness sound.

Special chassis design with 2 internal boxes each for left and right circuit. By arranging power supply parts independently for each channel, influences such as magnetic flux leakage are highly eliminated.

In near mint condition. Comes with factory-supplied pure silver power cord. Very rare and highly sought after!

Click here for more info.

Click here for full review
Kondo KSL-M77
 
 
Line Magnetic LM 219ia (Sold)
This is a pure Class A SET integrated amplifier using 12AX7, 310A, 300B and 845 vacuum tubes. Rated power is 24 watts per channel.

Specification of LM-219IA

Power Output: 24W+24WSingle-ended Class A
Frequency Response: 15Hz-35KHz-1.5dB
Input Impedance: 100k
Output Impedance: 4816
Tube: 12AX7, 310A, 300B, 845
W*D*H: 430*430*400 (mm)
Net weight: 70KG

Still in mint condition and looks like new! Comes with metal-bodied remote control and metal tube cage. A wooden platform on castors is also thrown in as a package.

Click here for owner's manual

Click here for full review
Line Magnetic LM 219ia
 
 
Kondo Gaku-On Monoblock 211 Tube Amplifier (Sold)
Effortless driving low efficiency speakers with GAKUON II 50W class A SET power.
Each power tube is driven by an exclusive driving tube, guarantee stable and wide soundstage.

Features pure silver internal wiring, signal capacitors and output transformers.

Features:
*Inherit circuit and all merits of ONGAKU with an improvement of high output power.
*Parallel single ended design, each 211 tube is driven by an exclusive driving tube.
*Recommended for those who enjoy clean and dynamic sound of 211.
*Best routes and wiring by skillfull technician to secure the best quality.
*Copper chassis which help improving sound extends and liveliness.

Very similar in circuit and sound to Gaku-On MK2. Main differences are some cosmetic changes and a detachable power cord for the MK2.

Comes with original boxes, owner's manual and captive pure silver power cords. All tubes have been upgraded to vintage NOS.

PLEASE NOTE. This pair was recently sent to Kondo Japan for full refurbishing and is guaranteed to work like a new unit.

Click here for more info.
Kondo Gaku-On Monoblock 211 Tube Amplifier
 
 
Audio Note AN-Vx RCA 0.8m Pair (Sold)
Audio Note pure silver-litz interconnect cable (RCA). This is the earlier version with 20 strands of pure silver-litz wire. The ideal signal cable for all tube electronics. Terminated with original AN-P silver plugs. In excellent condition.

Click here for more info.
Audio Note AN-Vx RCA 0.8m pair
 
 
Silbatone S.E.A. represents the following brands: Silbatone Acoustics, PS Audio, Audio Solutions, Audience, Bryston, Reed, Kronos, Gershman Acoustics, Audio Philar, My Sonic Lab, G.I.P. Laboratory and Flux Hifi.
 
Chord Signature Reference Speaker Cables 3m (Sold)
Trickle-down tech from Chord’s flagship Sarum has birthed a ‘Reference’ version of its shielded Signature speaker cable.

Hand built to order, Chord’s latest Signature speaker cable looks like the original but features improved conductors and dielectrics and is a mite more flexible too!

Click here for full review
Chord Signature Reference speaker cables 3m
 
 
Air Tight ATE-1 Phono Stage (Sold)
Very high quality pure tube phono stage for MM cartridge only. Made in Japan. Comes with external power supply.

Click here for more info.
Air Tight ATE-1 phono stage
 
 
CEC TL 51XR CD Player (Sold)
CEC presents the TL51XR with a latest Burr-Brown DAC, incorporating sophisticated the previous belt-drive technologies. In order to faithfully read the music signal recorded on disc, an extremely quiet drive mechanism, which can precisely stabilize the disc rotation and eliminate vibration and resonance, is essential. In the TL51XR, the spindle motor, which drives the disc, is completely isolated from the disc turntable. Any vibration or electromagnetic noise arising from the motor are either shut out or absorbed by the rubber belt. In addition to the belt, a precise disc stabilizer is essential for the belt-drive mechanism. The stabilizer solidly holds the disc onto the turntable, minimizing disc warping and vibration during playback.

In excellent condition, with fully working remote control. The laser head and belt were recently changed and it operates like new now. Due to the excellent belt-drive mechanism, it can also be used as an excellent CD transport!

Click here for more info.

Click here for full review
CEC TL 51XR CD player
 
 
Isotek EVO3 Premier Mains Cable UK (Sold)
Premier delivers excellent performance, and also represents outstanding value-for-money. No compromise has been made in relation to the quality of parts and materials used in its construction.

CONSTRUCTION: The conductors are in a parallel construction with a slight rotational twist. This established technique remains the first line of defence against RFI and EMI rejection.

A) Conductors: Silver plated 99.9999% OFC conductors offer an exceptional level of purity with enhanced conductivity. They are less likely to fracture (compared to solid core) or degrade over time. Silver is an excellent conductor and when combined with a high purity copper provides impressive electrical properties.

B) Dielectric: Teflon FEP (Fluorinated Ethylene Propylene) dielectric (insulation) is chemically inert and has a very low dielectric constant over a wide frequency range. FEP possesses a very high degree of stress crack resistance and a low coefficient of friction making it an exceptional dielectric. FEP is the first choice for safety in both temperature and electrical insulation.

C) Filler: Cotton filler has been used to give the cable internal strength and reduce microphony. Cotton also possesses excellent dielectric properties, the best of a solid material.

D) Wrap: A paper wrap is used to secure the construction prior to the application of a flexible PVC jacket. The addition of the paper and cotton form a buffer with the PVC so as to maintain exceptional dielectric properties.

E) Jacket: PVC is used as the outer jacket to give a high degree of flexibility and mechanical strength.

TERMINATION: Premier cable is terminated using IsoTek’s bespoke Audiophile grade moulded connectors of solid OFC with 24ct gold plated conductors. These offer the highest quality performance and are less prone to tarnish.

2 pcs available. 1.5m with UK 3 pin plug.

Click here for more info.
Isotek EVO3 Premier Mains Cable UK
 
 
Rogers Studio 3 (Sold)
Built in a laminated birch plywood box that appears to be identical to that of the LS3/5a, the Rogers Studio 3 keeps the older speaker's inset baffle. Mounted on the baffle, however, are completely different drive-units: a 19mm fabric-dome, ferrofluid-cooled tweeter from SEAS, crossed over at 3kHz to a 110mm woofer of Rogers's own manufacture.

A little less accurate than a 3/5A maybe, the Studio 3 is altogether faster, bouncier and in its way more fun. It’s almost as though Rogers have managed to combine some of the better characteristics of the contrasting 3/5A and Linn Kan 2 designs in one single model.

Click here for full review
Rogers Studio 3