Extreme simplicity ----- minimum circuitry

The heart of sound lives in the point of contact where musician and instrument meet. To trace this point-of-contact sound wave, Model 4706 utilizes a filter/condenser with the smallest possible capacity and a minimum number of parts, and the shortest signal pass length ever.

Powerful voltage regulation

If energy supply depends on the capacity of filter/condensers, you can easily lose the freshness of sound. The high capacity transformer of Model 4700 (170 VA) regulates enough energy to support the extremely small filter/condenser (1000 F) of Model 4706.

In excellent condition. This is the 50 watt, dual power supply version with 2 pcs 4700 power supplies.

Click here for more info.

Click here for full review

NES-3001 is the new flagship Neotech speaker cable. It joins the brand's wide range of high-end speaker cables. Its unique design allows it to participate in the reproduction of both warm and deep sound, thanks in particular to the effective insulation of PTFE conductors.

The cable has no less than 16 insulated conductors: 6 red, 6 black and 4 transparent. Each conductor, made of UP-OCC single crystal Copper, has an outer diameter of Ø2.1mm and an inner diameter of Ø1.1mm for a cross-section of 17AWG (1.04mm²) per conductor for a total cross-section of 8AWG (8.37mm²). These individually insulated conductors are then braided around a PVC core and covered with a braided Nylon sheath.

In excellent condition, with certificate and original carry case.

Click here for more info.

Audience AU24 SX series of audiophile cables are a total rethinking of their original AU24 SE design. They incorporate 99.9999 pure OCC copper conductors sheathed in a very high quality XLPE (cross linked polyethylene) dielectric insulating jacket. Audience's single-ended (RCA) and loudspeaker cables employ an innovative and very unique dual concentric coaxial geometry consisting of a perfect lay ribbon wind with opposing angles of the two conductors.

The Au24 SX RCA phono cables represent a significant upgrade in performance. Music is richer, fuller, more extended and engaging with the AU24 SX phono cables.

In near mint condition. Comes with original box. 1m pair factory terminated with RCA on both ends.

Click here for more info.

Click here for review

Besides the fact that this is one of the most powerful amplifiers on the market and can drive virtually any loudspeaker with total grace and ease, the 28B3 monoblock amplifiers are some of the finest sounding models ever at any power output. These amplifiers take complete control over your loudspeakers and command them to be their best. Bryston first-to-last-watt philosophy demands that each of our products sounds equally amazing at all power output levels.

Ex-demo units and under warranty. This is the current top model and rarely seen on the 2nd hand market.

Click here for more info.

Click here for full review

The Entreq Atlantis provides a cleaner and more stable grounding platform to a current Entreq grounding box. This both boosts capacity, as well as performance, to an already established Entreq grounding system. The Atlantis comes supplied with a short & specifically designed umbilical cable that allows you to connect directly on to the back of one of our dedicated grounding box's.

The Atlantis Tellus will enhance the performance of ALL Entreq ground boxes, even the top model Olympus Tellus.

Click here for more info.

This is one of the most sought after vintage preamps from McIntosh.

The MX110 excels at both being a great preamp and a tuner, while maintaining classic McIntosh looks. The Mclntosh MX110 is a beautifully engineered control center for the finest stereo sound systems. The extreme care in manufacturing, in layout design and in thermal engineering promises the usual Mclntosh extra values of reliability, performance, and long life.

Very rarely seen locally and a true collectors' item! In good working condition.

Click here for more info.

Click here for owner's manual

Thanks to new materials like Carbon Fibre and Termoplastic Elastomer Eat was designing a new superflat table. The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material).

The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50%

In near mint condition, and comes with original box, tonearm lead-out cable and custom-made dust cover.

Click here for more info.

Specifications

- Model No. - PS8JS
- Conductor - This Φ 0.26mm x 105 PC-Triple C
- Sectional Area - 5.575mm2 x 3
- Insulator - Audio Grade PVC + Black + Transparent Mesh
- Outer Dimensions - Φ 14.5mm
- Cable Length - 1.8m

In mint condition, with original box and papers.

Click here for more info.

Vintage KEF LS3/5A monitor speakers. In excellent condition.

An 11 cm KEF B110C type SP1228 unit is used for the middle and low frequencies up to 3 kHz, and a T27SP1032 tweeter is used for the high frequencies.

In order to completely seal the inside of the enclosure and make it airtight, PVC sheet is used on the edge of the woofer, and the unit is decoupled and sealed.

The network section consists of 26 carefully selected high-quality parts. Each speaker is individually adjusted by computer simulation, and the characteristics of the entire system are strictly controlled within ± 0.25 db of the BBC specification.

The front baffle is made of felt material around the unit to eliminate interference caused by vibration of the cabinet.

The enclosure is made of 12-mm-thick birch material, which is well known as a piano material and has excellent strength. In addition, beech wood is used as a splint for the joint part to increase the internal strength.

The Limetree BRIDGE II is a high-class network adapter or audio renderer which can transfer music digitally in studio master quality from streaming providers and local storage media to existing D/A converters or other devices with digital inputs. This makes it possible to upgrade an existing hi-fi system with streaming for little money.

The Limetree BRIDGE II is simply connected with the network by means of a LAN cable or via WLAN. It has also a USB port for connecting hard disks or USB storage media. There is an optical and a coaxial digital output. A professional studio engineering sample rate converter makes sure that all streamed formats can be played back on an existing converter without major losses in sound quality.

In as new condition, with original box and all accessories.

Click here for more info.

Click here for full review