The MArk Levinson ML52 is a reference quality design featuring a no-holds barred all-analogue, dual-monaural design arranged in a two-chassis system of discrete control and audio sections.

In the No.52’s control section are mirror-imaged DC power supplies and AC regeneration circuits. The audio section employs a mirrored left/right channel configuration, which includes isolated and independent circuit boards for the volume, main and auxiliary signal paths, not to mention extensive shielding. Individual DC umbilical cables between the two chassis carry power to each audio channel while control signals are conveyed via a third connection to keep them isolated.

Click here for more info.

Click here for full review

Tube integrated amplifier hand-made in Japan. 32 watts per channel. Features ability to swap between 6L6G/5881 and El-34 output tubes. Seldom seen on the 2nd hand market and highly sought-after!

*Power Amp Direct Switch. (All functions by-pass only excepting Volume control)
*Muting Switch.
*Stereo/Reverse Switch.
*Variable Output Impedance: 4/6/8/16 Ohms.
*Tape Monitor Switch.
*Bass Boost Switch.
*Headphone Output.
*Speaker/Headphone Selector Switch.
*Tube Indicator Lamps.
*Operation Lamp Indicator.

Click here for more info.

Click here for full review

This fully differential, fully discrete, dual-monaural Pure Path amplifier drives virtually any loudspeaker effortlessly for impeccable imaging, musicality, and openness. A direct-coupled signal path; a highly linear, low-feedback design; and voltage gain and drive stages operating in class A, are joined by the modern system integration capabilities provided by Ethernet, RS-232, and USB for monitoring and network control. Housed in a 6000-series aluminium chassis, like all Mark Levinson equipment, the № 534 is designed and handcrafted in the USA.

Still current model, in near mint condition. Rated Class A in Stereophile's Recommended Component listing.

Click here for more info.

Click here for full review

Acoustune HS1695Ti Myrinx driver in-ear monitor headphones has a balanced sound signature, with moderately boosted bass and trebles. It is significantly different sounding compared to the HS1670SS.

*Made in Japan
*Limited Edition
*Myrinx Composite Diaphragm
*Metal Body Shell
*Pure Audio Grade Cable
*Engineered Audio Connector Pentaconn EAR
Shell: Chamber 100% Titanium CNC milling & Housing 100% aluminum CNC milling
*Transducer: 10MM Single Dynamic Driver
*Impedance : 24 Ohm
*Sound Pressure Level : 110dB/mW
*Frequency Range : 10Hz - 25KHz
*Cable: Silver-coated OFC cable fitted with PentaconnEar*, L=1.2m (16-core). *PentaconnEar is NOT compatible with MMCX connectors.
*Plug: 3.5mm gold plated, L-Type

In as new condition, and comes with all accessories as shown in the pics.

Click here for user review

With Amati Anniversario, Sonus faber celebrates the birth of Andrea Amati five hundred years ago, the great Maestro of stringed instrument making from Cremona (1505-1577). This new homage is a sound diffuser perpetuating the experience gained from the most significant Sonus faber project thus far: Stradivari homage. The lute-shaped cabinet efficaciously “harmonises” resonances while dedicating considerable attention to the most innovative aspect of the projects work in the Sonus faber tradition. Amati Anniversario has been created to breathe life into the melodious weft of the fabric of music, in all its nuances, making the listening experience an extraordinarily moving event.

In excellent condition with flawless piano lacquer wood finish.

Click here for more info.

Click here for full review

K-07
High-end SACD player with VRDS disc clamping mechanism. Also features digital inputs, so you can use it as a DAC for other digital sources. Beautifully built and in pristine condition.

G-03x
This is a master clock generator, used for “WORD SYNC” among compatible digital devices. An external master clock generator re-times the synchronization between disc transports (or disc players), and digital to analogue converters. This re-timing process achieves advanced three-dimensional imaging and exceptional acoustical transparency for playback of source material from CD, SACD, DVD-A and DVD-V.

Price stated above is for both units. Please inquire if interested in only one item, thanks.

Click here for full review of K-07

Click here for more info of G-03x

Click here for owner's manual of G-03x

Built as an evolution from our renowned P12, P15, and P20 the P3 is our most affordable regenerator – perfect for powering sources and small to medium systems. Power Plants generate sine-wave-perfect, regulated, high current AC power from your home’s AC. Problems on your power line such as low voltage, distorted waveforms, sagging power, and noise are eliminated and the power quality enhanced. The Stellar P3 PowerPlant provides greatly improved performance and safety from just plugging into the wall socket, along with far better dynamics, more authoritative bass, and a much bigger, more open soundstage than any passive power conditioner on the market.

Brand new in box. Unit only taken out for photos to be taken. Complete with remote control, power cord, owner's manual and original box.

Click here for more info.

Click here for full review

A pinnacle of engineering. After 6 years of development and techs refinement, we give you a remarkable tandem of performance and design where science meets art. Figaro! maintains timeless AudioSolutions' design accents and gracefully slides into the overall product portfolio.

Three-way speaker system with Mini-Horn loaded silk dome tweeter and two ER (Extra Rigid) paper cone bass drivers which are known for a fast transient response, sound clarity and tight bass. Cabinet assembly is based on our Self-Locking and Box-in-a-Box technologies. Figaro features height-adjustable feet, "Stealth Grille" system and WBT NextGen connection terminals.

Combining materials is nice, but we have gone even further. We have modelled every surface in the speaker and made vibration analysis of it as a whole, and noticed the importance of joints between surfaces. It is remarkable what modern software can do. There is a very big difference between a simple joint and our Self-Locking joint. Without the Self-Locking joints, the analysis exposed huge flexibility in the joint areas which acts as hinges, after improving our joining technique the cabinet became virtually monolithic. The key concept here is that all surfaces act as one monolithic sandwich. The vibrations travel inside material until the joint is reached then it reflects back because the weak hinge-like joint can't transfer energy any further. Surfaces joined together in a locked joint becomes one system working together. The result is clear, tight and fast bass also vivid mids.

Showroom demo unit, fitted with after-market footers for increased isolation damping. With 6 months warranty.

Click here for more info.

Click here for full review

Extreme simplicity ----- minimum circuitry

The heart of sound lives in the point of contact where musician and instrument meet. To trace this point-of-contact sound wave, Model 4706 utilizes a filter/condenser with the smallest possible capacity and a minimum number of parts, and the shortest signal pass length ever.

Powerful voltage regulation

If energy supply depends on the capacity of filter/condensers, you can easily lose the freshness of sound. The high capacity transformer of Model 4700 (170 VA) regulates enough energy to support the extremely small filter/condenser (1000 F) of Model 4706.

In excellent condition. This is the 50 watt, dual power supply version with 2 pcs 4700 power supplies.

Click here for more info.

Click here for full review

NES-3001 is the new flagship Neotech speaker cable. It joins the brand's wide range of high-end speaker cables. Its unique design allows it to participate in the reproduction of both warm and deep sound, thanks in particular to the effective insulation of PTFE conductors.

The cable has no less than 16 insulated conductors: 6 red, 6 black and 4 transparent. Each conductor, made of UP-OCC single crystal Copper, has an outer diameter of Ø2.1mm and an inner diameter of Ø1.1mm for a cross-section of 17AWG (1.04mm²) per conductor for a total cross-section of 8AWG (8.37mm²). These individually insulated conductors are then braided around a PVC core and covered with a braided Nylon sheath.

In excellent condition, with certificate and original carry case.

Click here for more info.